In the entire lost foam casting process, the pouring process is one of the most important links. The four factors of pouring system, pouring speed, pouring tempe...

Sanzhuji has signed a number of sand casting projects with Saudi Arabian foundries. The production line configuration for this case is a 20T/H green sand casting...

In the actual production process, most of the reclaimed sand is used. For the stability of casting quality, it is necessary to add a part of new sand to the recl...

The casting mold after flow coating operation has smooth surface, uniform coating thickness, dense and clear outline. After casting, the surface of the cas...

Green sand casting is the most economical and widely used casting method. 65%-70% of castings in industrialized countries are produced by green san...

The reduction of the ratio of sand to iron in furan resin sand casting depends not only on the design, but also on the implementation of the site. Sand and ...

The lost foam casting workshop uses lost foam negative pressure casting to produce the casting while grinding the lining plate with ordinary sand casting raw mat...

The double-arm continuous sand mixer is a multi-section cantilever structure, and the sand mixing tank and the boom have long axes of rotary motion, ...

Hydraulic multi-contact molding machine can obtain a large pressing force through the hydraulic cylinder. During compaction, each contact exerts corresponding pr...

This green sand molding machine is an Argentine project. The worktable size of Z143 is 560*465mm, which is mainly suitable for the casting production of smal...

hot sand cooling is the key problem that must be solved in the wet sand casting process. When the temperature of the reused sand is 50℃-70℃, the performance of...

The sand quality target of large foundry green sand processing system is reflected in the advanced and reliable technology of core process equipment. Such ...

Used sand regeneration is a dry mechanical regeneration process, which is suitable for the regeneration of used sand produced by castings with a certain producti...

The green sand recovery system adopts a three-stage tower series process layout to meet the foundry production lines supporting the sand processing department of...

Vibration boiling cooling device (configured with automatic temperature measurement and proportional humidification), its principle an&#...

The new GS25-132 high-efficiency rotor sand mixer has a structural design: the disc diameter is 2500mm, the total power is about 242kW, and the production ...

Sand molding machine is mainly suitable for Green Sand Molding Line. It is a semi-automatic molding equipment. It is used in pairs. Sand molds are made by vibrat...

There are many factors that affect the quality of furan resin no-bake sand, such as the properties of raw sand and reclaimed sand, the t...

In recent years, Sanzhuji mainly produces rotor-type sand mixers according to the characteristics of green sand mixing. Efficient rotor-type sand mixers can grea...